Contact Us

Use the form on the right to contact us.

You can edit the text in this area, and change where the contact form on the right submits to, by entering edit mode using the modes on the bottom right. 

#204, 2910 16th Ave North
Lethbridge, AB, T1H 5E9
Canada

+1 403-320-6636

Lethbridge, Alberta based Onsite Safety Management helps your company manage your safety solutions and Government of Alberta safety requirements. Become COR and SECOR certified, Alberta's safety certification. Let us help keep your company safe by handling your Onsite Safety Management.

edited.jpg

Formal Workplace Inspections Training

This online Formal Workplace Inspections course provides the tools and knowledge needed to conduct an efficient workplace inspection.

 

Formal Workplace Inspections training

This online Formal Workplace Inspections course provides the tools and knowledge needed to conduct an efficient workplace inspection.

 
 

Formal Workplace Inspections training course contents

  • What hazards and safety inspections are

  • The frequency with which inspections should occur

  • Steps for pre-planning an inspection

  • Hazards to look for and guidelines to follow during an inspection

  • Helpful strategies for completing an inspection report

  • Corrective actions that can be taken to deal with hazards

  • Techniques for submitting and presenting recommendations following an inspection

  • Follow-up and monitoring activities that must occur after an inspection

 
 

COURSE DETAILS

Formal Workplace Inspections training DURATION:

Approximately 2 Hours

Formal Workplace Inspections training TESTING AND REQUIREMENTS:

Testing conducted in this online Formal Workplace Inspections course is designed to reinforce the information presented. A mark of 80% must be achieved on the final exam in order to receive a certificate of completion. Participants are able to repeat the course twice if the pass mark is not achieved on the first attempt. Supplemental materials for this course can be accessed online.

Formal Workplace Inspections training CERTIFICATE OF COMPLETION:

Upon successful completion of this online course, a certificate of completion will be available to download and print.

 

Why wait?

 
Featured In-class Courses
ST. JOHN'S EMERGENCY FIRST AID LEVEL A CPR & AED
ST. JOHN'S EMERGENCY FIRST AID LEVEL A CPR & AED

This 8 hour course provides a minimum level of first aid training as required by the Alberta Occupational Health and Safety Legislation for limited, low hazard occupations or workplace environments, such as offices or administration sites only.

ST. JOHN'S STANDARD FIRST AID LEVEL C CPR RECERTIFICATION
ST. JOHN'S STANDARD FIRST AID LEVEL C CPR RECERTIFICATION

This challenge is open to those who have a current Standard First Aid certificate from an Alberta OH&S approved program — with Level A or C CPR and with or without AED. If the certificate is from out-of-province then a full course must be taken. 

ST. JOHN'S STANDARD FIRST AID LEVEL C CPR & AED
ST. JOHN'S STANDARD FIRST AID LEVEL C CPR & AED

This 15 hour comprehensive course provides a level of first aid training as required by the Alberta Occupational Health and Safety Legislation for medium and high risk occupations or workplace environments such as but not limited to construction, processing, manufacturing, oilfield and forestry industries.

CONFINED SPACE PREPLANNING AND ENTRY
CONFINED SPACE PREPLANNING AND ENTRY

This 6 hour course is intended to teach people how to work safely in a confined space.

CONFINED SPACE PREPLANNING, ENTRY AND RESCUE
CONFINED SPACE PREPLANNING, ENTRY AND RESCUE

This 8 hour course is intended to educate people how to work and prevent incidents while in a confined space. Also, proper rescue techniques are performed using a simulator and air supplying breathing respirators.

FALL PROTECTION PLANNING
FALL PROTECTION PLANNING

The purpose of this 6 hour course is to promote safe work practices and procedures for participants who work at heights (over 3 meters/10 feet) by increasing their awareness of fall prevention and fall protection.

WHMIS 2015
WHMIS 2015

This classroom WHMIS 2015 course aims to prevent workplace injuries, diseases, and deaths resulting from the storage and use of hazardous products.

Hazard Assessment Training Program
Hazard Assessment Training Program

The purpose and intent of this course is to ensure that all workers understand and appreciate the values that a well done Hazard Assessment brings to the workplace.

ENERGY SAFETY CANADA H2S
ENERGY SAFETY CANADA H2S

COMING SOON. This full day course is intended for all workers in the petroleum industry who could be exposed to hydrogen sulphite (H2S). Trainees will demonstrate rescue lifts, drag exercises and will operate a self-contained breathing apparatus.

FORKLIFT TRAINING
FORKLIFT TRAINING

The purpose of this 4 hour course is to educate people who perform forklift operations on the rules, legislation and proper application of safe work practices and operating procedures involved in day-to-day activities. It is designed for individuals who have a basic understanding of, or who are presently operating forklifts.

GLOBAL GROUND DISTURBANCE II
GLOBAL GROUND DISTURBANCE II

This 7 hour training course is the standardized program that is recognized by industry regulators. It is designed for trainee’s that will be supervising a ground disturbance, performing a ground disturbance, and issuing or receiving permits.

AERIAL LIFT FUNDAMENTALS
AERIAL LIFT FUNDAMENTALS

The purpose of this 4 hour course is to educate people who perform aerial lift operations on the rules, legislation and proper application of safe work practices and operating procedures involved in day-to-day activities. It is designed for individuals who have a basic understanding of, or who are presently operating aerial devices or lifts.